I've successfully setup the VisualPro but my paired Trio 8800 and GroupSeries 500 losses their connection intermittently and i have to manually pair them again. Appreciate any insight to what settings might be causing this issue.
welcome to the Polycom Community.
Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition providing all details at the same time allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.
Aug 24, 2015 Question:What basic network data is send and received by a Polycom phone?
Resolution: Please check this post => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services