Whenever the phone is restarted or rebooted, a warning banner appears in the top-right corner of the LCD display on the desk phone. The warning message displays 'Default admin password is in use. Contact your administrator.'
I can clear the warning message but the warning appears again after restart or reboot.
When I change the Admin password on the phone or through the web interface, the warning goes away but the Admin password is reset to default after restart or reboot.
I followed the instructions related to Article 42741 but this did not resolve the issue either.
Details about my environment and phone are listed below.
Software version =5.9.7.38957
Phone Model =VVX 450
Call Platform =Zoom Phone
VVX 450 has zero touch provisioning. Added the MAC address to the user within Zoom's web interface then connected ethernet cable.
Enabled web interface.
No other configurations have been made.
Solved! Go to Solution.
This is a configuration setting specific to desk phones for Zoom Phone where the desk phones point to the provisioning server settings. These settings can be applied globally within Zoom's web interface. Refer to Zoom's help article here for more information:
https://support.zoom.us/hc/en-us/articles/360021119092-Managing-phones-and-devices
Hello @rsimon ,
Welcome to the Poly Community.
Please work with our Partner Zoom as there must be an override somewhere stored.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
This is a configuration setting specific to desk phones for Zoom Phone where the desk phones point to the provisioning server settings. These settings can be applied globally within Zoom's web interface. Refer to Zoom's help article here for more information:
https://support.zoom.us/hc/en-us/articles/360021119092-Managing-phones-and-devices