Plantronics + Polycom. Now together as Poly Logo

We need move position key the Polycom VVX 410

Occasional Contributor

We need move position key the Polycom VVX 410

version 5.6.1.XX

Model Phone Polycom VVX 410

we need move position key

it is provisioning file

<feature.enhancedFeatureKeys="1"/>
<lineKey>
      <lineKey.reassignment lineKey.reassignment.enabled="0">Enable the feature</lineKey.reassignment>
     <ColumnsDisplayedOnPone up.numOfDisplayColumns="2">VVX5xx,6xx Only 1,2,3,4 are acceptable</ColumnsDisplayedOnPone>
   </lineKey>
   <linekey lineKey.1.category="line" lineKey.1.index="1"/>
   <linekey lineKey.2.category="line" lineKey.2.index="2"/>
   <linekey lineKey.3.category="speeddial" lineKey.3.index="3"/>
   <linekey lineKey.4.category="speeddial" lineKey.4.index="4"/>
   <linekey lineKey.5.category="speeddial" lineKey.5.index="5"/>
   <linekey lineKey.6.category="speeddial" lineKey.6.index="6"/>
   <linekey lineKey.7.category="blf" lineKey.7.index="0"/>
   <linekey lineKey.8.category="blf" lineKey.8.index="0"/>
   <linekey lineKey.9.category="blf" lineKey.9.index="0"/>
   <linekey lineKey.10.category="blf" lineKey.10.index="0"/>
   <linekey lineKey.11.category="blf" lineKey.11.index="0"/>
   <linekey lineKey.12.category="blf" lineKey.12.index="0"/>
</polycomConfig>
<attendant.behaviors>
<attendant.behaviors.display>
<attendant.behaviors.display.remoteCallerID attendant.behaviors.display.remoteCallerID.automata="0" attendant.behaviors.display.remoteCallerID.normal="0">
</attendant.behaviors.display.remoteCallerID>
<attendant.behaviors.display.spontaneousCallAppearances attendant.behaviors.display.spontaneousCallAppearances.automata="0" attendant.behaviors.display.spontaneousCallAppearances.normal="0">
</attendant.behaviors.display.spontaneousCallAppearances>
</attendant.behaviors.display>
</attendant.behaviors>
<attendant attendant.resourceList.7.address="101@XCV.net"
attendant.resourceList.7.label="Joshua"
attendant.resourceList.8.address="102@XCV.net"
attendant.resourceList.8.label="Ethan"
attendant.resourceList.9.address="103@XCV.net"
attendant.resourceList.9.label="Eric Wellman "
attendant.resourceList.10.address="104@XCV.net"
attendant.resourceList.10.label="Mathew"  
attendant.resourceList.11.address="105@XCV.net"
attendant.resourceList.11.label="Benc"
attendant.resourceList.12.address="109@XCV.net"
attendant.resourceList.12.label="Joshua"/>
Message 1 of 3
2 REPLIES 2
Highlighted
Polycom Employee & Community Manager

Re: We need move position key the Polycom VVX 410

Hello @Pluciano,

welcome to the Polycom Community.

 

Your configuration has the feature disabled:

 

<lineKey.reassignment lineKey.reassignment.enabled="0">


The community's VoIP FAQ contains this post here:

Jan 12, 2012 Question: Can I change / re-assign the appearance of  Line, BLF, Speed Dial and Presence Keys?

Resolution: Please check => here <=

 

I suggest you check the above.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 3
Highlighted
Occasional Contributor

Re: We need move position key the Polycom VVX 410

I apply changes

<lineKey.reassignment lineKey.reassignment.enabled="1">

but cannot see result, the key keep in the same place.

Message 3 of 3