Plantronics + Polycom. Now together as Poly Logo

We need move position key the Polycom VVX 410

Occasional Contributor

We need move position key the Polycom VVX 410

version 5.6.1.XX

Model Phone Polycom VVX 410

we need move position key

it is provisioning file

      <lineKey.reassignment lineKey.reassignment.enabled="0">Enable the feature</lineKey.reassignment>
     <ColumnsDisplayedOnPone up.numOfDisplayColumns="2">VVX5xx,6xx Only 1,2,3,4 are acceptable</ColumnsDisplayedOnPone>
   <linekey lineKey.1.category="line" lineKey.1.index="1"/>
   <linekey lineKey.2.category="line" lineKey.2.index="2"/>
   <linekey lineKey.3.category="speeddial" lineKey.3.index="3"/>
   <linekey lineKey.4.category="speeddial" lineKey.4.index="4"/>
   <linekey lineKey.5.category="speeddial" lineKey.5.index="5"/>
   <linekey lineKey.6.category="speeddial" lineKey.6.index="6"/>
   <linekey lineKey.7.category="blf" lineKey.7.index="0"/>
   <linekey lineKey.8.category="blf" lineKey.8.index="0"/>
   <linekey lineKey.9.category="blf" lineKey.9.index="0"/>
   <linekey lineKey.10.category="blf" lineKey.10.index="0"/>
   <linekey lineKey.11.category="blf" lineKey.11.index="0"/>
   <linekey lineKey.12.category="blf" lineKey.12.index="0"/>
<attendant.behaviors.display.remoteCallerID attendant.behaviors.display.remoteCallerID.automata="0" attendant.behaviors.display.remoteCallerID.normal="0">
<attendant.behaviors.display.spontaneousCallAppearances attendant.behaviors.display.spontaneousCallAppearances.automata="0" attendant.behaviors.display.spontaneousCallAppearances.normal="0">
<attendant attendant.resourceList.7.address=""
attendant.resourceList.9.label="Eric Wellman "
Message 1 of 3
Polycom Employee & Community Manager

Re: We need move position key the Polycom VVX 410

Hello @Pluciano,

welcome to the Polycom Community.


Your configuration has the feature disabled:


<lineKey.reassignment lineKey.reassignment.enabled="0">

The community's VoIP FAQ contains this post here:

Jan 12, 2012 Question: Can I change / re-assign the appearance of  Line, BLF, Speed Dial and Presence Keys?

Resolution: Please check => here <=


I suggest you check the above.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Occasional Contributor

Re: We need move position key the Polycom VVX 410

I apply changes

<lineKey.reassignment lineKey.reassignment.enabled="1">

but cannot see result, the key keep in the same place.

Message 3 of 3