Plantronics + Polycom. Now together as Poly Logo

Zero Touch deployment 331 and 560

Highlighted
Occasional Visitor

Zero Touch deployment 331 and 560

Are there any instructions on how to setup The zero touch deployment of The soundpoint 331 and The 560?  I have a TFTP server setup and option 66 set on my dhcp server.  The Cisco spa models are getting their configs without me laying a single finger on them but The polycom I am having to set The protocol to TFTP, enter The server IP, and set The dhcp option to 66 before it will grab The config.

 

Any help is greatly appreciated.

 

Thanks

 

Brandon

Message 1 of 3
2 REPLIES 2
Occasional Advisor

Re: Zero Touch deployment 331 and 560

you have to set option 160 on your dhcp server.

then you will have almost zero touch deployment.

 

As i Know Polycom doesn't support Zero Tuch Provisiong based on sip mulitcasting, yet. let's jope yet :-)

 

if you need details how to configure option 160 let me know

 

Message 2 of 3
Occasional Advisor

Re: Zero Touch deployment 331 and 560

fo linux you have to set in dhcpd.conf

on the begiining before you define scope

 

option option-160 code 160 = string;

 

and then in the scope options:

 

    option option-160           "tftp://192.168.1.1";

 

in Windows server

first define custom option in server options. Right mouse click on DHCP server --> set predefined options --> add

enter code as 160, and data type as string.

 

then you are able to add option 160 into scope. scope --> configure options. Value should be like tftp://192.168.1.1

 

 

Message 3 of 3