Plantronics + Polycom. Now together as Poly Logo

attendant.resourceList for two servers

SOLVED
Frequent Advisor

attendant.resourceList for two servers

VVX400

UC Software Version 5.8.0.12848
Updater Version 5.9.5.13643

 

The phone has reg.1 and reg.2

Two different servers, IP, etc..

 

Is there a way to set which server BLF is for?

 

attendant.resourceList.25.label="813 Park"
attendant.resourceList.25.address="813@server2.com:5068"
attendant.resourceList.25.type="automata"
attendant.resourceList.26.label="715 Park"
attendant.resourceList.26.address="715@server1.com:5060"
attendant.resourceList.26.type="automata"

 

I tried the above - it seems to only use reg.1 for all blf. (both attendant.resourceList and buddy watch)

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: attendant.resourceList for two servers

No

Replied via a mobile device
----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: attendant.resourceList for two servers

No

Replied via a mobile device
----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2