attendant.resourceList.1.address="54564654" attendant.resourceList.1.label="milan suthar" attendant.resourceList.1.type="normal"
configuring above settings for speeddial makes phone reboot only when it changes not when same configuration apply with diffrent value,
i.e when apply new attendants , or removing all attendants.
i want to make phone reboot stop
Hello @milansuthar ,
Welcome back to the Poly Community.
Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.
If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.
Could you therefore kindly go over them and mark or answer as appropriate?
If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently. Please do not simply mark them without any type of feedback.
As a reminder for any new post:
Both the communities Must Read First and the FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Poly to have an overview of the current software used. In addition, providing all details at the same time allow us to check logs or look up potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Without the above, we are unable to make any meaningful suggestions as we do not know any details about your setup.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Phone Information Phone Model VVX 410 Part Number 3111-46162-001 Rev:A MAC Address 64:16:7F:94:F8:B7 IP Mode IPv4 IP Address 172.16.16.239 UC Software Version 188.8.131.5271 Updater Version 184.108.40.20647
this is phone information i am using.
Hello @milansuthar ,
What was the actual solution for >here<?
Without this, the marked post has no meaning and does not help anybody.
For >here< the suggestions where to get this into support and/or work with Broadsoft.
Again which was your solution for the issue?
Prior to explaining and documenting this, we will not be able to answer or try and help you with your new issue.