Plantronics + Polycom. Now together as Poly Logo

default configuration files phone1.cfg and sip.cfg for SoundStation IP 7000 release 3.3.3

SOLVED
Highlighted
Occasional Advisor

default configuration files phone1.cfg and sip.cfg for SoundStation IP 7000 release 3.3.3

Hej,

 

I have have an SoundStation IP 7000 phone and have downloaded the split version of Release 3.3.3 Split at the "Polycom® UC Software Release Matrix For SoundPoint IP and SoundStation IP Phones".

 

In spip_ssip_Admin_Guide_UCS_v3_3_0.pdf[0] there are multiple occurences of phone1.cfg or sip.cfg, e.g. pages 3-23 or A-124.

 

However, I can't find phone1.cfg or sip.cfg default configuration files in the Release 3.3.3 Split download.

 

Where can I get them?

 

Or are the default values of the SoundStation IP 7000 in the firmware and if those 2 files can't be found the phone works as well and I just have to create specific configuration files that I add in 000000000000.cfg?

 

Kind regards,

Reeth4Ku

 

[0] http://support.polycom.com/global/documents/support/setup_maintenance/products/voice/spip_ssip_Admin...

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: default configuration files phone1.cfg and sip.cfg for SoundStation IP 7000 release 3.3.3

Hello Reeth4Ku,

welcome to the Polycom Community.

 

Since UCS 3.3.0 these files are no longer required or provided.

The community's VoIP FAQ contains this post here:

 

Oct 7, 2011 Question: What is the relevance of the sip.cfg and phone1.cfg files?

Resolution: Please check => here <=

 

Above explains their relevance.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2