device.prov.ztpEnabled parameter - UCS 3.3.2 firmw...

luckman212 · ‎08-17-2011

Hello,

Several new parameters were introduced in UCS 3.3.2 firmware. I couldn't find documentation on the following:

<device.prov.ztpEnabled
    device.prov.ztpEnabled.set="0">
</device.prov.ztpEnabled>

Any help?

SteffenBaierUK · ‎08-17-2011

Hello Luckman212,

welcome to the Polycom Community.

ZTP is a solution that Polycom plans to offer at a future date. The feature should only be Enabled (from the phone Admin UI) if you are certified for the solution.”

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

luckman212 · ‎08-18-2011

Well I searched myself and learned that ZTP stands for Zero Touch Provisioning. Sounds interesting, but I guess we'll have to wait and see.

SteffenBaierUK · ‎08-18-2011

Hello Luckman212,

please see => here <= for further details.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

device.prov.ztpEnabled parameter - UCS 3.3.2 firmware?

device.prov.ztpEnabled parameter - UCS 3.3.2 firmware?

Re: device.prov.ztpEnabled parameter - UCS 3.3.2 firmware?

Re: device.prov.ztpEnabled parameter - UCS 3.3.2 firmware?

Re: device.prov.ztpEnabled parameter - UCS 3.3.2 firmware?