Plantronics + Polycom. Now together as Poly Logo

dialplan digitmap not working at all

SOLVED
Occasional Advisor

dialplan digitmap not working at all

Somewhere along the way the config template on the provisiong server lost the dialplan.

We put in the last know good dialplan but it doesnt seem to be working, even though it is getting picked up by the phones and showing up in the local config.

We have ucs 4.0.7 installed, mostly 335's.

 

Last know good config (200 is voicemail,3 digit extensions):

 

 <dialplan
    dialplan.digitmap="[2-9]xxxxxxxxx|[1]xxxxxxxxxx|200|911|0T|[1-8]xx.T|*xxxx|011x.T"
    dialplan.digitmap.timeout="3|3|3|3|3|3|3|3"
    dialplan.1.digitmap=""
    dialplan.1.digitmap.timeout=""
  />

 

I alos tried manually editing the digitmap on my phone to to just the very basic internal extension rule [1-8]xx.T and the phone just seems to be ignoring it.

Any help woiuld be appreciated.

Message 1 of 12
11 REPLIES 11
Polycom Employee & Community Manager

Re: dialplan digitmap not working at all

Hello Bogdan,

welcome back to the Polycom Community.

I suggest you download and install UC Software 4.0.11 first in order to be on a currently supported release.

 

You can then follow this:

 

Oct 7, 2011 Question: Phone unable to Dial a number when Off Hook or on 2nd Call in a Conference or Digitmap issues

Resolution: Please check => here <=

 

the above contains logging levels you can use to troubleshoot.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 12
Occasional Advisor

Re: dialplan digitmap not working at all

Hi Steffen, thanks for your quick reply.

I've updated to 4.0.11, changed my dialplan to what was in your article as well as turned the logging on support objects to Event 1.

The phone still does nothing when punching in any numbers, have to hit the dial button.

There is nothing in the logs, it just shows configuration applied successfully.

Below is the config snippet that includes the dialplan and the bit that turns off voicemail notification is working normally.

 

Any ideas where to go next with this?

    <!-- Dial Plan settings-->    
    <dialplan
        dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxT"
        dialplan.digitmap.timeout="3|3|3|3|3|3"
        dialplan.1.digitmap=""
        dialplan.1.digitmap.timeout=""
    />
    
    <se
    se.rt.custom1.name="3CX Auto Answer"
    se.rt.custom1.ringer="default"
    se.rt.custom1.type="answer"
    />
    
    <!-- voIpProt.SIP.alertInfo.2 intentionally not used -->
    <voIpProt.SIP.alertInfo
    voIpProt.SIP.alertInfo.1.class="custom1"
    voIpProt.SIP.alertInfo.1.value="auto-answer"
    />


    <!-- Distingtive Ring Tone & Voice Mail Sound-->    
    <se>
        <se.pat>
            <se.pat.misc>
                <se.pat.misc.messageWaiting>
                    <se.pat.misc.messageWaiting.inst
                        se.pat.misc.messageWaiting.inst.1.value="0"/>
                </se.pat.misc.messageWaiting>
            </se.pat.misc>
        </se.pat>

    </se>
Message 3 of 12
Polycom Employee & Community Manager

Re: dialplan digitmap not working at all

Hello Bogdan,

Are you dialing on Hook aka no dialtone or of Hook aka dialtone playing?

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 12
Occasional Advisor

Re: dialplan digitmap not working at all

Hi Steffen,

off hook(dialtone) works.

on hook(no dialtone, phone is idle) doesnt work.

Message 5 of 12
Polycom Employee & Community Manager

Re: dialplan digitmap not working at all

Hello Bogdan,

This is very simple. Dialing on hook is not run through the digitmap.

 

Please add this to your configuration:

 

dialplan.userDial.timeOut="3"

You can manipulate the time.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 12
Occasional Advisor

Re: dialplan digitmap not working at all

Now im getting the error below:

.cfg: Unknown parameter "dialplan.userdial.timeout" found, ignoring.

 

It should be in the dialplan block, correct?

  

<dialplan
        dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxT"
        dialplan.digitmap.timeout="3|3|3|3|3|3"
        dialplan.1.digitmap=""
        dialplan.1.digitmap.timeout=""
        dialplan.userdial.timeout="3"        
    />
Message 7 of 12
Polycom Employee & Community Manager

Re: dialplan digitmap not working at all

Hello Bogdan,

apologize, I overlooked you where using an older version.

 

You cannot use this parameter.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 8 of 12
Occasional Advisor

Re: dialplan digitmap not working at all

Hi Steffen,

Im not against upgrading firmware if it will work... whats the minimum firmware for these 335's that will support that feature?

Message 9 of 12
Polycom Employee & Community Manager

Re: dialplan digitmap not working at all

Hello Bogdan,

You cannot upgrade to a version that has this feature. Unfortunately you need to live with this.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 10 of 12