-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- dual registration with different servers
Create an account on the HP Community to personalize your profile and ask a question
03-12-2012 09:46 AM
Hello,
Please kindly advise the proper settings for a IP 501 (3.17 SIP) phone that require registration with two different remote servers. I've used the settings below without success. Only the first line is able to register.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?> <!-- Example Per-phone Configuration File --> <!-- $Revision: 1.85.6.3 $ --> <reg reg.1.displayName="100.abc" reg.1.address="100.abc" reg.1.label="100" reg.1.type="private" reg.1.thirdPartyName="" reg.1.auth.userId="100.abc" reg.1.auth.password="100" reg.1.server.1.address="x.x.x.200" reg.1.server.1.transport="DNSnaptr" reg.1.server.1.port="5060" reg.1.server.1.expires="3600" reg.1.server.1.register="1" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="" reg.1.acd-login-logout="0" reg.1.acd-agent-available="0" reg.1.ringType="2" reg.1.lineKeys="2" reg.1.callsPerLineKey="" reg.2.displayName="2000.xyz" reg.2.address="2000.xyz" reg.2.label="2000" reg.2.type="private" reg.2.thirdPartyName="" reg.2.auth.userId="2000.xyz" reg.2.auth.password="2000" reg.2.server.1.address="x.x,x.100" reg.2.server.1.port="5060" reg.2.server.1.transport="DNSnaptr" reg.2.server.1.expires="3600" reg.2.server.1.register="1" reg.2.server.1.retryTimeOut="" reg.2.server.1.retryMaxCount="" reg.2.server.1.expires.lineSeize="" reg.2.acd-login-logout="0" reg.2.acd-agent-available="0" reg.2.ringType="3" reg.2.lineKeys="1" reg.2.callsPerLineKey="" />
My sip.cfg:
<sip> <voIpProt> <local voIpProt.local.port="" /> <server voIpProt.server.1.address="" voIpProt.server.1.port="5060" voIpProt.server.1.transport="DNSnaptr" voIpProt.server.1.expires="" voIpProt.server.1.expires.overlap="" voIpProt.server.1.register="1" voIpProt.server.1.retryTimeOut="0" voIpProt.server.1.retryMaxCount="0" voIpProt.server.1.expires.lineSeize="30" voIpProt.server.1.lcs="" voIpProt.server.2.transport="DNSnaptr" voIpProt.server.dhcp.available="" voIpProt.server.dhcp.option="" voIpProt.server.dhcp.type="" /> <SIP voIpProt.SIP.useRFC2543hold="0" voIpProt.SIP.useSendonlyHold="1" voIpProt.SIP.lcs="0" voIpProt.SIP.csta="0" voIpProt.SIP.sendCompactHdrs="0" voIpProt.SIP.keepalive.sessionTimers="0" voIpProt.SIP.requestURI.E164.addGlobalPrefix="" voIpProt.SIP.allowTransferOnProceeding="" voIpProt.SIP.ms-forking="" voIpProt.SIP.pingInterval="" voIpProt.SIP.useContactInReferTo="" voIpProt.SIP.serverFeatureControl.dnd="" voIpProt.SIP.serverFeatureControl.localProcessing.dnd="" voIpProt.SIP.serverFeatureControl.cf="" voIpProt.SIP.serverFeatureControl.localProcessing.cf="" voIpProt.SIP.authOptimizedInFailover="" voIpProt.SIP.strictLineSeize="" voIpProt.SIP.lineSeize.retries="" voIpProt.SIP.strictUserValidation="" voIpProt.SIP.header.warning.enable="0" voIpProt.SIP.header.warning.codes.accept="" voIpProt.SIP.header.diversion.enable="0" voIpProt.SIP.header.diversion.list.useFirst="1" voIpProt.SIP.acd.signalingMethod="" voIpProt.SIP.tcpFastFailover="" voIpProt.SIP.use486forReject=""> <outboundProxy voIpProt.SIP.outboundProxy.address="" voIpProt.SIP.outboundProxy.port="5060" voIpProt.SIP.outboundProxy.transport="DNSnaptr" /> <alertInfo voIpProt.SIP.alertInfo.1.value="" voIpProt.SIP.alertInfo.1.class="" /> <requestValidation voIpProt.SIP.requestValidation.1.request="" voIpProt.SIP.requestValidation.1.method="" voIpProt.SIP.requestValidation.1.request.1.event=""> <digest voIpProt.SIP.requestValidation.digest.realm="PolycomSPIP" /> </requestValidation> <specialEvent voIpProt.SIP.specialEvent.lineSeize.nonStandard="1" voIpProt.SIP.specialEvent.checkSync.alwaysReboot="0" /> <conference voIpProt.SIP.conference.address="" /> <dialog voIpProt.SIP.dialog.useSDP="" voIpProt.SIP.dialog.usePvalue="" /> <connectionReuse voIpProt.SIP.connectionReuse.useAlias="0" /> <SDP voIpProt.SDP.useLegacyPayloadTypeNegotiation=""> <answer voIpProt.SDP.answer.useLocalPreferences="" /> </SDP> <musicOnHold voIpProt.SIP.musicOnHold.uri="" /> <compliance> <RFC3261> <validate voIpProt.SIP.compliance.RFC3261.validate.contentLanguage="" /> </RFC3261> </compliance> </SIP> </voIpProt>
Solved! Go to Solution.
Accepted Solutions
03-13-2012 04:00 AM
Hello xmel,
welcome to the Polycom Community.
I am unsure what exactly you have done so far but booting a SPIP501 with no specific settings so it loads it's 000000000000.cfg and via this it's sip.cfg and phone1.cfg should just enable you to add the separate server & registration Details via the Web Interface.
For a single registration that is shown => here <=
For a second line on a different server just use the Line 2
Example if done via a separate Configuration File:
reg.1.server.1.address="10.252.75.119" reg.1.label="3019 " reg.1.auth.userId="3019" reg.1.auth.password="3019" reg.1.address="3019" reg.1.displayName="Ast 119" reg.2.server.1.address="10.252.75.203" reg.2.label="3019 " reg.2.auth.userId="3019" reg.2.auth.password="3019" reg.2.address="3019" reg.2.displayName="Ast 203"
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
03-13-2012 04:00 AM
Hello xmel,
welcome to the Polycom Community.
I am unsure what exactly you have done so far but booting a SPIP501 with no specific settings so it loads it's 000000000000.cfg and via this it's sip.cfg and phone1.cfg should just enable you to add the separate server & registration Details via the Web Interface.
For a single registration that is shown => here <=
For a second line on a different server just use the Line 2
Example if done via a separate Configuration File:
reg.1.server.1.address="10.252.75.119" reg.1.label="3019 " reg.1.auth.userId="3019" reg.1.auth.password="3019" reg.1.address="3019" reg.1.displayName="Ast 119" reg.2.server.1.address="10.252.75.203" reg.2.label="3019 " reg.2.auth.userId="3019" reg.2.auth.password="3019" reg.2.address="3019" reg.2.displayName="Ast 203"
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
03-13-2012 04:41 AM
Hello xmel,
can I kindly remind you of the FAQ ?
Oct 7, 2011 Question: What is the relevance of the sip.cfg and phone1.cfg files?
Resolution: Please check => here <=
The Phone running any older software than UCS 3.3.0 will always need these 2 files.
You can rename them to any name but the name's need to be added / changed in the 000000000000.cfg / <mac>.cfg so the phone will find and load them.
A separate configuration can be added just for the registration.
If you require additional assistance from Polycom Support to troubleshoot this issue please raise this via your Polycom Reseller as this is outside the scope of this Polycom Community for Polycom employed support personnel.
Best regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Didn't find what you were looking for? Ask the community