Plantronics + Polycom. Now together as Poly Logo

old product

Occasional Visitor

old product

I have a polycom c100 (not cx) that i am trying to set up with my windows 10 pc. It was set up before but the hdd crashed. I went to set up the system again and (i am the 3rd tech to be here since it was purchased in i believe 2006). 


When i try to install pvx i get a dll error. I believe that it is due to my software wanting to be in xp or 7. 

When i installed Polycom Real Presence, it asked for activation key- i entered the key but it was too short i believe due to the product being so old. i cannot find anywher to contact polycom for this type of support. 

Any ideas on how i could push forward? 


Also, i do have a website login with an email of a tech that has not been emplyed here in 6+ years and cannot access that email to reset password due to the login not working at all. 


Am i out of luck and require a new product?

Message 1 of 2
Polycom Employee & Community Manager

Re: old product

Hello @ChipNB ,


welcome to the Poly Community.

The C100 / C100S was never supported on Windows 10 or Windows 8. Any support provided was only Windows XP, Windows Vista or Windows 7.

We stopped providing support for the device back around 2013


The same for PVX. We stopped support for this back in 2014 and a similar story around Windows 10. The PVX software was replaced by the m100 software which itself was replaced by RealPresence Desktop.


If you purchased a legit RealPresence Desktop Key it will work or the organisation who sold you the key will support you.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2