Plantronics + Polycom. Now together as Poly Logo

"Freezing" display on Phone model VVX(310,500)

Occasional Contributor

"Freezing" display on Phone model VVX(310,500)

Hello Community!

 

I have a variable problem with phones of VVX series.
I'm setting up the phone and it works stably. But at some point (for examle, after a month) after talking when you hang up, the phone display freeze. i.e. actually the conversation ended, but the animation on the display continues to operate. Then after day the phone with this problem the phone this problem works properly. What is the reason? How can we solve this problem?

 

version firemware 5.5.0.20556 on VVX310 and VVX500

 

 

Problem on video:

https://www.youtube.com/watch?v=0gWYj-nLAyg

https://www.youtube.com/watch?v=0iKLMJHhliM

 

Message 1 of 5
4 REPLIES 4
Polycom Employee & Community Manager

Re: "Freezing" display on Phone model VVX(310,500)

Hello MIhail,

welcome to the Polycom Community.

This could have a multitude of reasons including the SIP signalling.

 

Can you verify that the phone in question actually receives a BYE message from the far end or SIP switch?


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 5
Occasional Contributor

Re: "Freezing" display on Phone model VVX(310,500)

I will try to get the dump switch, but when you press the hang up key, the remote phone ends call correctly
This problem is noticed only VVX series, on Sound Point  series the problem is not observed.

What reasons can be?

And I notice that problem arise when the VVX phone is synchroning with NTP server

Message 3 of 5
Polycom Employee & Community Manager

Re: "Freezing" display on Phone model VVX(310,500)

Hello MIhail,

without knowing the exact configuration, call scenarios and involved software versions its hard to tell.

 

Most likely this needs to open a ticket.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 5
Highlighted
Occasional Contributor

Re: "Freezing" display on Phone model VVX(310,400,500)

Ok, mac address my VVX400 0004.f278.fb18 and VVX500 0004.f28d.37c6

Message 5 of 5