Plantronics + Polycom. Now together as Poly Logo

"Parameter <param> requested type X but is of type Y" what do they mean?

Highlighted
Frequent Advisor

"Parameter <param> requested type X but is of type Y" what do they mean?

Some facts

▪︎ VVX500, sip ver 5.4.1.14510 installed

▪︎ Local Provisioning server on LAN

▪︎ I have performed a Full Factory Reset on the device (Settings > Advanced > Admin > Reset > 5)

 

 

Problem

When looking at my logs after a reboot, I see some troubling lines about config file errors. I would like to resolve these or at least be told that it is safe to ignore them. The format is basically "Parameter param requested type X but is of type Y" which you can see several examples of below.

 

I have reviewed my config XML files as well as the 5.4.1 Admin guide many times to make sure they look correct. I have even gone so far as to re-type these entries to make sure there were no hidden/garbage characters lurking in there. At this point I am at a loss. Where can I find documentation of these "types" and how to determine the correct values to use for these params?

 

 

Some output lines from my App log file after a recent boot:

000100.816|cfg |5|00|Prm|Parameter dir.corp.backGroundSync.period requested type 2 but is of type 0
000100.818|cfg |5|00|Prm|Parameter dir.corp.attribute.x.addstar requested type 4 but is of type 7
000100.818|cfg |5|00|Prm|Type 4 7 for array parameter 53 index 1 is not valid
000102.135|cfg |5|00|Prm|Parameter feature.flexibleLineKey.enable requested type 2 but is of type 7

 

Message 1 of 3
2 REPLIES 2
Polycom Employee & Community Manager

Re: "Parameter <param> requested type X but is of type Y" what do they mean?

Hello luckman212,

welcome back to the Polycom Community.

 

Any chance for some quick feedback on your old post for example => here <=

If you double check these parameters against your own current configuration I assume you find that none or only some of these are present.

 

These are actually erroneous error messages and you can simply ignore these.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Frequent Advisor

Re: "Parameter <param> requested type X but is of type Y" what do they mean?

Hello Steffen, thank you for the reply.  I just added a comment to the other post you linked to.

 

Out of those 4 parameters, yes I do have 3 of them defined in my 000000000000-global.cfg: 

 

dir.corp.backGroundSync.period="3600"
dir.corp.attribute.1.addstar="1"
dir.corp.attribute.2.addstar="1"
dir.corp.attribute.3.addstar="0"

 

The one that I do not seem to find in my config anywhere is  feature.flexibleLineKey.enable

 

As you advise I will just ignore them I suppose.  But it is a little bit strange that the phone complains about them.

 

Message 3 of 3