Plantronics + Polycom. Now together as Poly Logo

setting lldp sysname on vvx phones

Occasional Contributor

setting lldp sysname on vvx phones

Hi,

 

all my vvx 411 phones identify themselves as " Polycom VVX 411" in the sysname field of lldp.

is it possible to change that info to hostname ?

would help to identify the phone at the switchport, easier that having a list of the same name at all phones.

thx

/Joachim

 

 LLDP Remote Device Information Detail

  Local Port   : 3
  ChassisType  : network-address
  ChassisId    : 10.34.71.104
  PortType     : mac-...
  PortId       : 64 16 7f be f8 f8
  SysName      : Polycom VVX 411
  System Descr : Polycom;VVX-VVX_411;3111-48450-001,1;SIP/5.9.5.0614/04-Oc...
  PortDescr    : 1

  System Capabilities Supported  : bridge, telephone
  System Capabilities Enabled    : telephone

  Remote Management Address
     Type    : ipv4
     Address : 10.34.71.104

  MED Information Detail
    EndpointClass          :Class3
    Media Policy Vlan id   :0
    Media Policy Priority  :5
    Media Policy Dscp      :46
    Media Policy Tagged    :False
    Poe Device Type        :PD
    Power Requested        :5.0 W
    Power Source           :Local & PSE
    Power Priority         :Unknown

 

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: setting lldp sysname on vvx phones

Hello @stain ,

 

Welcome to the Poly Community.

 

There is currently no way to do this. You would need a feature request:

 

Jan 03, 2013 Question: How can I request a change aka feature request to the current Polycom SIP / UC Software?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2