Plantronics + Polycom. Now together as Poly Logo

softkey and sip information

Highlighted
Advisor

softkey and sip information

hello

 

I am running UCS 5.4.1 on VVX phones and I need to create a softkey in which I could send the "reg1.address" value.

for example, this softkey will call an IVR number, send my phone "reg.1.address" and then dial #

 

i don't know how to get/send my reg.1.address.

is it possible ?

 

thanks

best regards

Message 1 of 3
2 REPLIES 2
Polycom Employee & Community Manager

Re: softkey and sip information

Hello Kakiman,

welcome back to the Polycom Community.

To my knowledge this is not possible.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Advisor

Re: softkey and sip information

Hello Steffen,

 

ok thanks, if ever I find something, i will let the community know

 

thanks

 

Message 3 of 3