Re: vvx 400 barrel connector for power, not poe

zappy · ‎10-03-2019

there is a non-poe option to power this phone. I don't have a connector that fits the hole. I do have a voltage boost stabilizer setup.

I need the dimensions of the male power barrel. I don't have calipers.

SteffenBaierUK · ‎10-04-2019

Hello @zappy ,

Welcome to the Poly Community.

The official part number for example for a US power supply is 2200-46170-001

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.

zappy

Your response is not a reply. Yes, I could buy that. This is not my question. I need dimensions of the barrel tip connector in millimeters: inner diameter, outer diameter.

For example these are the measurements for the typical 5 volt barrel: [attached]

SteffenBaierUK

Hello @zappy ,

this community is hosted by Polycom and moderators are Polycom employees. Therefore we cannot provide details outside of what Polycom offers. We do sell power supplies and they will fit the connector on the phone.

Best Regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.

vvx 400 barrel connector for power, not poe

vvx 400 barrel connector for power, not poe

Re: vvx 400 barrel connector for power, not poe

still require dimensions

Re: still require dimensions