we are pleased to annouce the release of the Polycom Trio UC Software 5.7.2 Rev AA.
Polycom Trio System Support for Cisco WebEx
The Cisco WebEx application enables users to join scheduled meetings with one click. Note you cannot host a Cisco WebEx meeting on a Polycom Trio system.
For instructions, see the Polycom Unified Communications for Cisco WebEx – Deployment Guide on Polycom Support.
Simple Certificate Enrollment Protocol Parameters
Use the Release Notes documented parameters to configure Simple Certificate Enrollment Protocol (SCEP).
Polycom Labs Experimental Features:
Large Room Audio Coverage (Audio daisy-chaining over IP)
This release includes a Polycom Labs experimental feature that allows you to pair two Polycom Trio systems (with or without a paired Polycom Trio Visual+, VisualPro, or Group Series system) via IP for enhanced audio performance in large or acoustically challenging rooms. When the two Polycom Trio systems are paired, the speakers and microphones act as a single speaker and microphone array for superior acoustic performance.
Implement Audio Daisy-Chaining over IP
To improve audio in large or acoustically challenging rooms, you can pair two Polycom Trio systems to achieve a single speaker and microphone array for superior acoustic performance.
Before you begin, you must ensure that:
Both Polycom Trio systems are connected to the same network subnet.
The network supports multicast and multicast is enabled.
Both Polycom Trio systems are running UC Software 5.7.2AA or later.
The parametermr.pair.maxDevices="2" or higher
The following refers to Trio A and Trio B to help distinguish device behavior as you complete steps.
On Trio A, go to Settings > Advanced > Networked Devices, and set Networked Device Role to HUB.
On Trio B, go to Settings > Advanced > Networked Devices, and set Networked Device Role to DEVICE. Trio B may reboot. If Trio B does not reboot, reboot manually. Note that the Trio B set to DEVICE must reboot for the setting to take effect.
After the Trio B reboots, follow the onscreen instructions that display on the Trio A and Trio B to complete the pairing.
In addition, we fixed various filed issues as noted in the release notes.
---------------- The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's