Reply
Highlighted
Frequent Visitor
Posts: 3
0

How to secure SIP trunk between DMA and Asterisk PBX

Dear community,

 

We use following architecture of Clariti : 2x RPCS1800 8.7.3, RM 8.3 VE, DMA 6.3 VE, Real Connect integration with MS Lync2013

I try to encrypt SIP trunk between DMA and Asterisk PBX (all incoming calls from the PBX)

Most prefered is SRTP.

Wthout encryption audiocalls are fine.

When I enable secure mode od DMA, all audio cals immediately are dropped on IVR (i can't hear any annoucement).

Other participants as H.323 endpoints work fine.

 

When I analyze logs from Asterisk, I see that RPCS 1800 still try to connect to the PBX on 5060 without encryption

SRTP on Asterisk is enable

 

Do you have any suggestion whan can be wrong?

I attached screens from the affected call

 

thank you in advance

Michal

Polycom Employee & Community Manager
Posts: 14,030
0

Re: How to secure SIP trunk between DMA and Asterisk PBX

Hello Michal,

welcome back to the Polycom Community.

 

Did you ever solve your original issue => here <= ?

How is your Asterisk connected ?

 

To the DMA or to the RMX ?

 

Please provide as much details as you can.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.