Reply
lkp
Visitor
Posts: 5
0

VVX 410 Call Park Line Button Key Issue

[ Edited ]

I currently have 6 Polycom VVX410 phones connected over POE switch and the switch connected to a SonicWall TZ300 series router. I'm having an intermittent issue with call park on all of the Polycom phones. Call parks are currently setup 3 of the "line key" buttons. Sometimes when placing a call into call park the "line key" does not go red as it's supposed to. My current carrier VoIPLY doesn't seem to be able to figure out what is causing this issue. We've replaced the router, phones, switch, cable modem and checked router settings. All 6 phones are on the current software version: 5.6.0.17325. VoIPLY appears to be using Freeswitch for their system. If we do a reboot of the phones call parks works normally by the line key going red but then starts happening again. Any ideas of what other troubleshooting steps we could take?  

Polycom Employee & Community Manager
Posts: 14,015
0

Re: VVX 410 Call Park Line Button Key Issue

Hello lkp,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

Jan 19, 2012 Question: How to troubleshoot Polycom VoIP related Issues?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
lkp
Visitor
Posts: 5
0

Re: VVX 410 Call Park Line Button Key Issue

[ Edited ]

What software can I use to look at the syslogs? This wasn't very much help at all. I am not experienced with Polycom devices and my current provider hasn't been much help. I need some sip trace tools that are easier to use. The information you provides is for more advanced users.

Polycom Employee & Community Manager
Posts: 14,015
0

Re: VVX 410 Call Park Line Button Key Issue

Hello lkp,

You simply look at the logs on the Phone aka Diagnostics > View & Download Logs

 

If you struggle with this please open a support ticket.


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you. End Customers are usually unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
lkp
Visitor
Posts: 5
0

Re: VVX 410 Call Park Line Button Key Issue

[ Edited ]

 Phone aka Diagnostics > View & Download Logs

Doesn't show SIP trace information.



Polycom Employee & Community Manager
Posts: 14,015
0

Re: VVX 410 Call Park Line Button Key Issue

Hello

Please follow the simple FAQ instructions or work with your Polycom reseller as already advised

Replied via a mobile device
Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
lkp
Visitor
Posts: 5
0

Re: VVX 410 Call Park Line Button Key Issue

[ Edited ]

SteffenBaierUK wrote:
Hello

Please follow the simple FAQ instructions or work with your Polycom reseller as already advised

Replied via a mobile device


Simple? Not even. 

Polycom Employee & Community Manager
Posts: 14,015
0

Re: VVX 410 Call Park Line Button Key Issue

[ Edited ]

Hello lkp,

 

you have the following options:

 

  • Try and utilize the FAQ provided. Its simple and you just need to follow the illustrated instructions.

  • Another community member gives up their time and walks you through the steps needed

  • Contact your Polycom reseller as they are your Tier 1 support

If the last option is not possible due the device being out of warranty please go ahead and work with this reseller via PPI / Pay Per Incident.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
lkp
Visitor
Posts: 5
0

Re: VVX 410 Call Park Line Button Key Issue


SteffenBaierUK wrote:

Hello lkp,

 

you have the following options:

 

  • Try and utilize the FAQ provided. Its simply and you just need to follow the illustrated instructions.

  • Another community member gives up their time and walks you through the steps needed

  • Contact your Polycom reseller as they are your Tier 1 support

If the last option is not possible due the device being out of warranty please go ahead and work with this reseller via PPI / Pay Per Incident.

Best Regards

Steffen Baier

Polycom Global Services


My reseller Telequest International are ignoring my requests to file a ticket with you. Polycom is the worst company to deal with when it comes to any support. You force your customer to purchase from a reseller you list on your website and if you don't you them the middle finger. Very professional. 

Polycom Employee & Community Manager
Posts: 14,015
0

Re: VVX 410 Call Park Line Button Key Issue

[ Edited ]

Hello lkp,


I already posted this:


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you. End Customers are usually unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

 

I have never heard of Telequest International and why would they ignore you if you are a valid customer?

 

Please provide me with the MAC of the phone and I try to find out who the reseller is.

 

Please take a moment and read:

 

Mar 8, 2012 Question: What kind of support should I expect from the Community?
Clarification: Please check => here <=


Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.