Plantronics + Polycom. Now together as Poly Logo

Assign a button to dial a number on a VVX411 via Polycom Resource Manager

Occasional Visitor

Assign a button to dial a number on a VVX411 via Polycom Resource Manager

Using Polycom Resource Manager I want to assign a button on a group of VVX 411 phones to dial a number.  Should be simply but 8 hours later still working on it.  Below is the phone config.  I see nothing assigned on button 2 like I expect. Also some confusion on the parameter: efk.efklist.2.mname="number". I read you also needed to add a contact in the local directory named "number". Makes no sense why that is needed since action.string has the number to dial.  Also, if that is needed how to you get that on the phone from the Resource Manager.



<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Application SIP Grande 23-Jun-18 11:33 -->
<!-- Created 19-12-2018 22:08 -->
<!-- Base profile Lync -->
 <!-- Note: The following parameters have been excluded from the export:
  efk.efklist.2.label="HCC Paging"
  softkey.3.label="My Status"


Message 1 of 2
Polycom Employee & Community Manager

Re: Assign a button to dial a number on a VVX411 via Polycom Resource Manager

Hello @Dan Bacon,


welcome to the Polycom Community.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:


  • Provide the exact Software Version of your Phone
  • Provide the Phone Model
  • Provide the Call Platform (aka openSIP,Skype for Business Online, Skype for Business on Premise, Lync)
  • Additional Polycom Infrastructure (RPRM,PDMS or BToE)
  • If applicable provide a backup of the phone in question

UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup

  • If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
  • If possible provide the MAC Address or Serial of the device
  • Provide details if the issue is a day 1 issue or only happened after an upgrade or any other relevant details

Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition providing all details at the same time allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.

Please ensure you always check the FAQ's and/or utilize the community search before posting any

new topics or follow up post’s.


Nov 25, 2011 Question: How can I change the functionality of a softkey button / use EFK?

Resolution: Please check => here <=


You are missing to enable the Enhanced Feature key


Any change to a Softkey always requires:



If you still struggle and the community search or other members are unable to help please open a ticket.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter providing your MAC address or your Polycom devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Polycom device from.

If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2