Phone Model VVX 400
Part Number 3111-46157-002 Rev:A
MAC Address 00:04:F2:DF:D8:46
UC Software Version 184.108.40.20673
Updater Version 220.127.116.1143
Voice Switch: Broadsoft
Long press on BLF now with this new firmware gives option for Park or Blind both in config, and also on the phone, including selecting during a call, depending on configuration.. That's awesome!!! Thanks, Polycom! Woot (not being sarcastic; I truly am appreciative). Here's my issue..
Everything works as expected/hoped.. except.. when I press to select park for a given BLF, the feature uses FAC *68, and I need it to use *86..I have found syntax to update Retrieval and Directed Call Pickup as described =>HERE<= and also referenced with new Enhanced BLF parameters =>HERE<==
I'm looking for something like:
..where values would be *codes just like the other two. [see "footnote" 1 below if interested..]
Last thing - before we circle around to setting up a softkey to use the *86 FAC, that we can do. (see one of my previous replies) That's not the issue.. it's just that one setting....
I will also submit via our vendor/direct as a Polycom partner); I'm just curious to know if anyone else has tried this and/or if someone is aware of parameter syntax to set the *park* string. Thanks y'all!
(I have left out the other requested information like phone logs because as far as I can see this comes down to either there's a parameter/syntax or there isn't. Phone is behaving just fine and as programmed)
[Footnote1: (the tense in my example is of course incorrect with regards to the fact that a call can't be parked until the Park string is processed, but hopefully the point comes across.)]
[Footnote2: (non-referenced) .. as things are currently, when I use the feature and try to park a call I end up blocking my outbound Caller ID because that's what we have *68 set to do.. so I know the feature is working in terms of dialing a string, it's just the wrong string..]
welcome back to the Polycom Community.
The parameter call.parkedCallString exists in the UCS configuration system. It’s in the sip-interop.cfg template
I opened a Documentation Bug so it gets added to the Admin Guide
Jan 14, 2015 Question:Finding the default values for configuration parameters for Polycom Phones?
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Thanks, Steffen! I look forward to working on this today. Thank you for also pointing out the extra parameters (that may not have made it into the Admin guide.)