Plantronics + Polycom. Now together as Poly Logo

Create new Soft Key

SOLVED
Highlighted
Advisor

Create new Soft Key

HI,

 

I have a polycom 601 with firmware 2.2.2

 

How can i create  create new Soft Key via provisioning HTTPS?

 

I was trying to add this to sip.cfg:

 

<softkey softkey.feature.mystatus="0" softkey.1.label="Park" softkey.1.action="#*7$Tdtmf$$Cpause8$$Changup$"

softkey.1.enable="1" softkey.1.use.active="1" softkey.1.precede="0"/>

 

But this does not work.

 

Thanks.

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: Create new Soft Key

Hello nikita,

 

we actively encourage users in the FAQ to use the search Function.

 

In doing so before posting you could have found this post => here <=

 

This is not supported on the Software you are using.

 

Best Regards

 

Steffen Baier

 

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Create new Soft Key

Hello nikita,

 

we actively encourage users in the FAQ to use the search Function.

 

In doing so before posting you could have found this post => here <=

 

This is not supported on the Software you are using.

 

Best Regards

 

Steffen Baier

 

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2