Plantronics + Polycom. Now together as Poly Logo

Distinctive Ring on inbound routes

SOLVED
Bert16112
Member

Distinctive Ring on inbound routes

Trying to set up distinctive ring on inbound routes FreePBX 13.0.194.2 polycom soundpoint IP 550 and 650 firmware version  4.0.7 have serched and found a few older post put cant seem to make things work would take any suggestions or instruction on how to get this acomplished.

 

Thanks

Bert16112

Message 1 of 7
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Distinctive Ring on inbound routes

Hello @Bert16112,

The suggested FAQ is pretty detailed on this as your server is sending:

 

 "Alert-Info: <Highest Double Trill>"

 

but the phone would be expecting:

 

 "Alert-Info: info=Highest Double Trill"


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 6 of 7
6 REPLIES 6
SteffenBaierUK
Polycom Employee & Community Manager

Re: Distinctive Ring on inbound routes

Hello @Bert16112,

welcome to the Polycom Community.

 

UC Software 4.0.7 is no longer a supported version so please ensure to upgrade to UC Software 4.0.13

The community's VoIP FAQ contains this post here:

 

Oct 25, 2011 Question: How can I change my Ringtone or Ring in a special manner for a certain incoming call?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 7
Bert16112
Member

Re: Distinctive Ring on inbound routes

Thanks for the info i have updated to 4.0.13 as said to in post.

I found this https://pbxinaflash.com/community/threads/polycom-alert-info-distinctive-ring.11261/ and would be great but cant get to work. Would appreciate help with this concept if any suggestions to getting it to work.

Message 3 of 7
SteffenBaierUK
Polycom Employee & Community Manager

Re: Distinctive Ring on inbound routes

Hello @Bert16112,

How about posting your configuration and maybe some logs or traces so people in the community can check if the SIP server even sends the correct SIP NOTIFY message as provided in the FAQ?

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 7
Bert16112
Member

Re: Distinctive Ring on inbound routes

Here is a piece of the log file showing <Highest Double Trill> in the alert info.

and after that is, what is in the SIP-Interop.cfg alertinfo 

Then the third peice is what I think needs added but not sure how to get it done with EndPoinManager.

Also attached complete sip cfg and log file

 

Thanks for the help

Bert

 

Executing [s@func-apply-sipheaders:3] While("SIP/347-00022bd1", "1") in new stack
[2018-02-14 14:31:44] VERBOSE[9583][C-00011a5f] pbx.c: -- Executing [s@func-apply-sipheaders:4] Set("SIP/347-00022bd1", "sipheader=<Highest Double Trill>") in new stack
[2018-02-14 14:31:44] VERBOSE[9583][C-00011a5f] pbx.c: -- Executing [s@func-apply-sipheaders:5] SIPAddHeader("SIP/347-00022bd1", "Alert-Info: <Highest Double Trill>") in new stack
[2018-02-14 14:31:44] VERBOSE[9583][C-00011a5f] pbx.c: -- Executing [s@func-apply-sipheaders:6] EndWhile("SIP/347-00022bd1", "") in new stack
[2018-02-14 14:31:44] VERBOSE[9583][C-00011a5f] pbx.c: -- Executing [s@func-apply-sipheaders:3] While("SIP/347-00022bd1", "0") in new stack
[2018-02-14 14:31:44] VERBOSE[9583][C-00011a5f] pbx.c: -- 

 

 

voIpProt.SIP.acd.signalingMethod="0"
>
</voIpProt.SIP.acd>
<voIpProt.SIP.alertInfo
voIpProt.SIP.alertInfo.1.class="autoAnswer"
voIpProt.SIP.alertInfo.1.value="Auto Answer"
voIpProt.SIP.alertInfo.2.value=""
voIpProt.SIP.alertInfo.2.class="default"
voIpProt.SIP.alertInfo.9.="Highest Double Trill"
voIpProt.SIP.alertInfo.9.class="custom9"
>
</voIpProt.SIP.alertInfo>
<se>
<se.rt>
<se.rt.custom9 se.rt.custom9.name="Highest Double Trill"
se.rt.custom9.ringer="ringer9" />
</se.rt>
</se>

 

SteffenBaierUK
Polycom Employee & Community Manager

Re: Distinctive Ring on inbound routes

Hello @Bert16112,

The suggested FAQ is pretty detailed on this as your server is sending:

 

 "Alert-Info: <Highest Double Trill>"

 

but the phone would be expecting:

 

 "Alert-Info: info=Highest Double Trill"


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 6 of 7
Bert16112
Member

Re: Distinctive Ring on inbound routes

Thanks for the help

 

Bert

Message 7 of 7