Plantronics + Polycom. Now together as Poly Logo

IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

SOLVED
IT_easycompare
Occasional Visitor

IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

We use IP Station Duo (SIP), registered to Cisco Call Manger, it got issue with external DTMF IVR.

I found detail from this knowledgebase

 

http://community.polycom.com/t5/VoIP/FAQ-Phone-unable-to-send-DTMF-to-an-IVR-system-or-how-to/td-p/4...

 

 

I have been up load the "dtmf_payload_127.cfg" still did not working, or which configuration path that I can do revise ?

config_files.cfg, web.cfg,devices_settings.cfg or phone_local.cfg ?    

 

Cisco engineer checked on voice gateway and ask to change DTMF tone to be 127:

 <dtmf>
  <tone tone.dtmf.rfc2833Payload="127"/>
 </dtmf>

 

Phone Information Phone Model SoundStation Duo Part Number 3111-19000-001 Rev:H         UC Software Version 4.0.12.0926 BootROM Software Version 5.0.12.0033

Message 1 of 5
1 ACCEPTED SOLUTION

Accepted Solutions
IT_easycompare
Occasional Visitor

Re: IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

Yup, I tried to put under "web" and under "config_file" after restored and rebooted, that command was gone from configution file when backup to verifyed so it dtfm still not working..  how can I pass you my configuration fil ?  if you can edit for me.

thanks

 

View solution in original post

Message 3 of 5
4 REPLIES 4
SteffenBaierUK
Polycom Employee & Community Manager

Re: IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

Hello IT_easycompare,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

 

May 25, 2017 Question: Can I create a backup of my current configuration?

Resolution:Since UC Software 4.0.0 or later a backup can be created via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup


Utilizing the above simple instructions enables you to check within your backup <Web section if the added configuration is present.

 

As you are using a software later than 3.2.0 the payload type requested by the Cisco Engineer is already used.

 

I suggest to use the rest of the FAQ post to troubleshoot this.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 5
IT_easycompare
Occasional Visitor

Re: IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

Yup, I tried to put under "web" and under "config_file" after restored and rebooted, that command was gone from configution file when backup to verifyed so it dtfm still not working..  how can I pass you my configuration fil ?  if you can edit for me.

thanks

 

View solution in original post

Message 3 of 5
SteffenBaierUK
Polycom Employee & Community Manager

Re: IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

Hello IT_easycompare,

As already outlined the Payload is 127 as a standard and therefore if set agin is removed as we are already applying this value.

 

The backup of the configuration will only show parameters that differ from the standard.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 5
IT_easycompare
Occasional Visitor

Re: IP Station Duo UC4.0.12.xx, how to add "tone tone.dtmf.rfc2833Payload="127"

Ok,

 

1. exported  web file and put the revised payload to 101, 

web>

  tone.dtmf.onTime="100"
  tone.dtmf.rfc2833Payload="101"

 />

 

2. inport again.

 

 

 Then it worked right now, Thanks. 

 

Message 5 of 5