Plantronics + Polycom. Now together as Poly Logo

No Audo on VVX D60 with SRTP

Occasional Contributor

No Audo on VVX D60 with SRTP

I have a VVX D60 paired with a VVX 400.

When I disable encryption on the VVX 400, I can make and receive calls with the D60.

 

However when I enable encryption, I cannot hear audio using the D60. The VVX is able to hear audio.

I have confirmed this issue using both firware versions 5.7.1 and 5.9.1 on the VVX 400.

D60 info: v0.7.41 package VVX-D60_DSW-97

 

Using XML provisioning, here are my security settings:

 

<security sec.tagSerialNo="0">
 <SRTP sec.srtp.enable="1"
  sec.srtp.requireMatchingTag="0"
  sec.srtp.leg.enable="1"
  sec.srtp.offer="1"
  sec.srtp.require="1"
  sec.srtp.mki.startSessionAtOne="1"
  sec.srtp.offer.HMAC_SHA1_80="1"
  sec.srtp.offer.HMAC_SHA1_32="0"
        sec.srtp.holdWithNewKey="0"
     sec.srtp.resumeWithNewKey="0" />
 </security>

Packet capture shows VVX communicating with 5061 (as desired). Signalling seams to work.

 

Message 1 of 7
6 REPLIES 6
Polycom Employee & Community Manager

Re: No Audo on VVX D60 with SRTP

Hello @SomeoneElse,

 

welcome to the Polycom Community.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

 

  • Provide the exact Software Version of your Phone
  • Provide the Phone Model
  • Provide the Call Platform (aka openSIP,Skype for Business Online, Skype for Business on Premise, Lync)
  • Additional Polycom Infrastructure (RPRM,PDMS or BToE)
  • If applicable provide a backup of the phone in question

UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package

  • If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
  • If possible provide the MAC Address or Serial of the device
  • Provide details for example if the issue is a day 1 issue or only happened after an upgrade or any other relevant details
  • For questions around Support please check here

Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition providing all details at the same time allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.


Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.

 

Stating the above most likely we would need to get this into support


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter providing your MAC address or your Polycom devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Polycom device from.

If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 7
Occasional Contributor

Re: No Audo on VVX D60 with SRTP

Details as requested:

Phone Model  VVX 400 paired with D60
Part Number  3111-46157-002 Rev:A
MAC Address  00:04:F2:C7:85:D4
IP Mode  IPv4
UC Software Version  5.9.1.0615
Updater Version  5.9.7.12459
Call Platform: openSIP

Message 3 of 7
Highlighted
Polycom Employee & Community Manager

Re: No Audo on VVX D60 with SRTP

Hello @SomeoneElse,

 

your VVX400 was sold by SCANSOURCE COMMUNICATIONS back in 27/08/2015 so the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

 

Contact ScanSource as they can open a ticket for you.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 7
Occasional Contributor

Re: No Audo on VVX D60 with SRTP

Hi Steffen,
Thanks for your response. This issue is affecting many handsets. I know that I can open a ticket, but isn’t this a public forum?
Message 5 of 7
Polycom Employee & Community Manager

Re: No Audo on VVX D60 with SRTP

Hello @SomeoneElse,

 

of course you can post anything in this community but I assume you would expect a fix if this is in any case a bug on our site so I provided the escalation path.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 7
Occasional Contributor

Re: No Audo on VVX D60 with SRTP

Understood, thank you.

Service Request Number 1-11412379921 opened.


@SteffenBaierUK wrote:

Hello @SomeoneElse,

 

of course you can post anything in this community but I assume you would expect a fix if this is in any case a bug on our site so I provided the escalation path.

Best Regards

Steffen Baier

Polycom Global Services


 

Message 7 of 7