I am provisioning a Polycom VVX400 and getting errors, but I am just trying to find if there is somewhere that I can get more details on what the errors are.
In Settings -> Platform -> Configuration, I see that a file is throwing 1 error and another is throwing 101. I can also see this in the app.log:
000022.658|cfg |4|00|Prm|Configuration file(s) statistics: 101 parameters were invalid and could not be interpreted. 000022.658|cfg |4|00|Prm|Configuration file(s) statistics: 1 parameter values were used but were out of range. 0 were invalid and ignored.
Is there somewhere that I can find more specifics about which parameters are causing the errors? It is hard to narrow down the issue with only a count of the number of problems.
For additional details, this is on V5.6 firmware. I updated the .cfg files and seem to have fixed the errors that were printing above, but I am still having an issue. Specifically what I am trying to diagnose is the SNTP server not being set on the phone.
The following lines in the config are setting the server:
<tcpIpApp> <tcpIpApp.sntp tcpIpApp.sntp.address="10.0.201.70" tcpIpApp.sntp.gmtOffset="-18000" tcpIpApp.sntp.address.overrideDHCP="1" tcpIpApp.sntp.gmtOffset.overrideDHCP="1" /> </tcpIpApp>
But after updating config the SNTP server in the phone settings is blank and a ! is flashing in the top corner for date/time.
welcome back to the Polycom Community.
101 Errors in a single file are worrying so I suggest you check this file. The errors should usually also be documented within the logs itself.
Lowering the Configuration Logging level should also show more details.
In regards of a Time Issue the community's VoIP FAQ contains this post here:
Jan 28, 2013 Question: Time and Date flashing or unable to set time correctly
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services