Soundpoint 650 Programming

schneidercom · ‎04-12-2012

I'm looking for some simple programming instructions for the following tasks:

1) Setup a softkey from the main screen to the company directory on SP IP450s

2) Setup Operator call status for all users on SP IP650 with sidecar

My SIP provider recommended these phones, and I'm starting to regret it over how difficult configuring them seems to be.

Any help would be appreciated.

SteffenBaierUK · ‎04-12-2012

Hello schneidercom,

welcome to the Polycom Community.

We encourage all users to check the FAQ as both EFK => here <= and BLF => here <= is already outlined in detail.

Your Polycom Reseller should be the first person to contact in case you are running into technical difficulties as they have sold you the Item.

Feel free to utilize the search facility as all above has been discussed already in the VoIP Section on plenty of other occasions.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Soundpoint 650 Programming

Soundpoint 650 Programming

Re: Soundpoint 650 Programming