Plantronics + Polycom. Now together as Poly Logo

configuring polycom speeddials (attendants ) makes phone reboot

Highlighted
Occasional Visitor

configuring polycom speeddials (attendants ) makes phone reboot

Phone Information
Phone Model	VVX 410
Part Number	3111-46162-001 Rev:A
MAC Address	64:16:7F:94:F8:B7
IP Mode	IPv4
IP Address	172.16.16.239
UC Software Version	5.5.2.8571
Updater Version	5.7.2.21547

 

attendant.resourceList.1.address="54564654"
attendant.resourceList.1.label="komal"
attendant.resourceList.1.type="normal"

 

configuring above settings for speeddial makes phone reboot, only when it make any changes, not when same configuration apply with diffrent value,

i.e when apply new attendants , or removing all attendants.
 i want to make phone reboot stop


 

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: configuring polycom speeddials (attendants ) makes phone reboot

Hello @komal ,

 

Welcome to the Poly Community.

 

Someone >here< using the same domain as you and IPv6 has not answered their questions asked.

 

I close this double post so you can work with that person.


Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2