Plantronics + Polycom. Now together as Poly Logo

Configuring a Polycom Phone

Occasional Visitor

Configuring a Polycom Phone

Hi Everyone,

 

I have a Soundstation IP 5000 and I would like to make some adjustements to it but I have a few questions about the configuration file.

 

When do I make adjustments to the Tx gain and the Rx gain? i.e. During a conference, the other party is hard to hear. 

 

Also, when I make these adjustment, would I make an entry for the analog and the digital gain?

 

The PBX is a grandstream UCM with FXO ports.

Message 1 of 6
5 REPLIES 5
Polycom Employee & Community Manager

Re: Configuring a Polycom Phone

Hello @jnsimex,

welcome to the Polycom Community.

It is always useful to include the currently used SIP or UC Software version as issues experienced or a question asked may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Must Read First" and is the absolute minimum requirement every new post should include. .

In addition providing us with this basic information gives Polycom an idea what Software Versions are used in the field and avoids wasting time trying to troubleshoot issues which have already been addressed.

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here

 

Usually we do not publish how to manually adjust these settings via configuration files as the standard settings adhere to international specifications and are tried and tested by Polycom.

 

If you want to change anything and cannot find any posts using the community search you would need to open a support ticket.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 6
Occasional Visitor

Re: Configuring a Polycom Phone

Hi, here is the phone information.

 

Phone Information

Phone Model VVX 410

Part Number 3111-46162-001

Rev:A

MAC Address 64:16:7F:97:5B:16

IP Address 10.0.0.171

UC Software Version 5.4.0.5841

Updater Version 5.6.0.8213

Message 3 of 6
Polycom Employee & Community Manager

Re: Configuring a Polycom Phone

Hello @jnsimex,

Your original post was about a SSIP5000 but you now posted details from a VVX410.

 

The VVX410 was sold via SCANSOURCE COMMUNICATIONS back in 29/11/2017 so they are your Tier 1 support.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 6
Occasional Visitor

Re: Configuring a Polycom Phone

Hi Steffan,

 

Sorry my bad. Here is the phone information for the IP5000.

 

Phone Information

Phone ModelSoundStation IP 5000

Part Number3111-30900-001

Rev:HMAC

Address64:16:7F:12:65:C6

IP Address192.168.0.135

UC Software Version4.0.12.0926

BootROM Software Version5.0.12.0033

Message 5 of 6
Polycom Employee & Community Manager

Re: Configuring a Polycom Phone

Hello @jnsimex,

 

First Video Communications FZ-LLC sold this back in 29/09/2017


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 6